Good morning all,
I have currently mounted 2 hella 500FF's in my grille area of my 04 screw and was really interested in hooking them into my Briggs just cause I don't want to drill into my interior to mount a aux switch. Any help on this would be appreciated. Would be interested in both just hooking to high beams also may be interested in a three way switch that allows use of them w/o high, off, and with high.
Thanks guys and gals!
Results 1 to 3 of 3
-
02-21-2012, 06:41 AM #1Junior Member
- Join Date
- Jan 2012
- Name
- Jon
- Location
- Greenfield, Ohio
- Posts
- 7
Info in aux lights tied into high beams
2004 Ford F150 4x4 Supercrew Lariat 5.4l
2002 Ford Mustang GT Convertible 4.6l
2001 Ford Ranger Edge 4x4 ext cab 4.0l
-
02-21-2012, 11:47 PM #2Da Professuh
- Join Date
- Jan 2012
- Name
- Alex
- Location
- Live Oak, FL
- Posts
- 1,444
Whats a briggs?
You can mount them to a 40A relay and from the relay (with respective grounds and power from the batt) run a wire to a DPDT switch with one pole tied into a high beam wire.4.2L V6 - M5OD | SCT XCal 3 @ JawsRacing | K&N Series-77 | 16" Dual Efans | Magnaflow High-Flows
50W 5000K FX-R Projectors | Philips LumiLED Taillights | 60" Plasmaglow Fire & Ice | 2" Drop Shackles
-
02-22-2012, 07:52 PM #3Junior Member
- Join Date
- Jan 2012
- Name
- Jon
- Location
- Greenfield, Ohio
- Posts
- 7
Meant brights...I obviously didn't proof read that
----------
I would rather not have any switches..2004 Ford F150 4x4 Supercrew Lariat 5.4l
2002 Ford Mustang GT Convertible 4.6l
2001 Ford Ranger Edge 4x4 ext cab 4.0l
Reply With Quote
