Results 1 to 4 of 4
  1. #1
    Junior Member
    Join Date
    Jan 2018
    Name
    Kris
    Location
    Edmonton
    Posts
    2

    Clicking noise in dash

    Hello I have a 2013 f150 FX4. Recently my truck started to make a clicking noise in the dash. I did a bunch of research on the Internet and it said that my blend air door actuator is faulty. So today I removed my centre part of the dash, radio and LCD screen to access the actuator. Once I got to it I took it out and then turned on my key to see if it stoped, but there was still a clicking noise. I looked and looked to see if I could see another one but could not. It seams to be coming from the very bottom but can't figure it out. Is there anyone that has had this problem that could give me any ideas

    Thanks
    Kris

  2. #2
    Junior Member
    Join Date
    Jun 2017
    Name
    Greg Sullivan
    Location
    Goodlettsville, TN
    Posts
    13
    There is a few motors in there.. it could be the recirc door or the mode door (floor/dash/defrost vents). Blend door would have given you issues with the temperature.

    You need to figure out which one doesn't change when you operate it.



    Sent from my SAMSUNG-SM-G930A using Tapatalk

  3. #3
    Junior Member
    Join Date
    Jan 2018
    Name
    Kris
    Location
    Edmonton
    Posts
    2
    It does not seam to make any difference. The only time it seams to stop is when I turn to full cold. I switch it to the other settings and they seam to all still work.

    ----------

    Do you know where the other ones are located?

  4. #4
    Junior Member
    Join Date
    Mar 2017
    Name
    Tony Crumley
    Location
    Colorado
    Posts
    9
    Quote Originally Posted by 7mm View Post
    It does not seam to make any difference. The only time it seams to stop is when I turn to full cold. I switch it to the other settings and they seam to all still work.

    ----------

    Do you know where the other ones are located?
    Above the gas pedal looking towards the center of the truck. Just had mine done.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •