PDA

View Full Version : Rox Suspension Systems 2.5" front lift kit



AJSP07
08-28-2012, 06:17 PM
Hey guys,

I was thinking of buying a Rox suspension systems 2.5" lift kit spacer for the front of my 1999 ford f150 lariat stepside. It's a 2WD, I was wondering what you guys recommend? I wanted to level it with the back without paying much for it and this is what I found. But before I purchased it wanted to make sure I was doing it right. Please help.

Thanks
My email is: Adrian.sanpedro7@gmail.com

BFEB
08-28-2012, 06:41 PM
That should be fine. It's a simple install I leveled my 08 4X4

BFEB
08-28-2012, 06:45 PM
You may look for a 1.5" or 2" kit tho. Most of the 4X4 trucks have a block on the back frame rails so the 2.5" might put your front higher than the back

AJSP07
08-28-2012, 07:06 PM
So a 2.5" is good for my model?

----------

Well what brand that's not to pricy do you recommend and how many inches ?

BFEB
08-28-2012, 07:32 PM
There are several good brands out there. I used hell bent steel. Check them out. Just google 99 f150 leveling kit

AJSP07
08-28-2012, 08:25 PM
Alright sounds good. Thanks a lot!

----------

I forgot to ask, how many inches should I search for ? A lot say 2.5 but I want it to be as even as possible

BFEB
08-28-2012, 08:41 PM
Park on flat ground and measure from the ground to the center of your fender well on both the front and back. That will tell what size kit you'd need.

AJSP07
08-28-2012, 10:14 PM
Thanks so much I'll post pictures when I do it! Hopefully soon haha