PDA

View Full Version : 4wd



KURAS13
02-20-2012, 01:32 PM
Have a 2000 f150 4wd with 5.4. And was wondering if anybody knows why my 4wd won't stay in gauged. It will kick in but as soon as it gets in a bind it pops out. Any ideas?

fx4150
02-20-2012, 11:31 PM
Could be low fluid in the transfer case

KURAS13
02-21-2012, 02:12 PM
I'll check it out. I thought it could be vacuum related or electrical. Its really irritating.

codwel09
08-27-2012, 01:03 PM
I believe by that yr ford made their 4wd vacuum operated, but the thing about it is if it doesn't have vacuum it will be in 4wd. So in other words the relay or solenoid could be sticking to where it is getting vacuum all the time causing it to go in and out. That could be your problem. The switch is located over the pass wheel in the back of the engine compartment in my 05. I'm not sure where it is located in the 2000 model.