Spark plug change and broke the clip on the coil pack connector.

[Cleveland48]

So changed my plugs today all went well until the next to the last one. Not sure what I did different, but i broke the little tab to the connector that goes to the coil pack. The one where you press down and pry up at the same time. Seems to be staying on so far I pressed it all the way down slid down the red tab. Could this cause an issue? And if so how much trouble am I looking like to replace the connector? Thanks for any advice.

Sent from my SM-N960U using Tapatalk

[alltrucksexpert]

Hey man, i am having the same problem, except THREE are broken! I tryed to find solution, but there is no suggestion. what did you end up doing to fix this?
Thank you!

[Cleveland48]

Luckily the black tab on the inside of the connector was only partially broken. Once I put it back on and slid the red locking tab down it would not come off. So hopefully it will stay that way.

Sent from my SM-N960U using Tapatalk

[alltrucksexpert]

Luckily the black tab on the inside of the connector was only partially broken. Once I put it back on and slid the red locking tab down it would not come off. So hopefully it will stay that way.

Sent from my SM-N960U using Tapatalk

Oh, I will try to do the same, maybe it will help me. It's cool, that you find solution. Thanks for your help and reply, bro.

[Cleveland48]

No problem man hope you get it sorted out

Sent from my SM-N960U using Tapatalk