PDA

View Full Version : Gauging an idea for exterior look for my SC 14



Bullet Tooth Tony
04-12-2016, 06:45 AM
Hey everyone, I have been schetching an idea for what I want to do on my SC 14. This is kind of a rough schetch of what I'm wanting to do since there is not a whole lot of aftermarket support for the 14's.

http://uploads.tapatalk-cdn.com/20160412/5bce9861879830636f78e6f15c2ac501.jpg

Most of the body mods I'm wanting to do are all one off custom peices and I know a local custom fab shop who said that they would be interested in doing the work. The shop gave me a rough guestiminte of 15k to 20k for all of the fab work and etc. Which I know is a lot for a truck that may not be worth it.

I wanted to get your thoughts on the look and if there are any suggestions you may have, please provide them as this is very new to me. Thanks for your time.

Bullet Tooth Tony
06-04-2016, 01:44 PM
Hey guys here is a more defined scetch of the look that I'm trying to go for.

http://uploads.tapatalk-cdn.com/20160604/925e5c6a1096b7067499c34502f0cf4f.jpg

Let me know what you think

FX4Life
06-04-2016, 02:47 PM
Looks too much like a Mustang in my opinion

----------

But it looks well done and it's your truck

Jersey_Joe
06-04-2016, 03:14 PM
Hey guys here is a more defined scetch of the look that I'm trying to go for. Let me know what you think
Looks like a GT500. I kinda like those lol. Love the hood. Love the grill. Love the lower valence Make two of each lol

lit up by F150leds.com & 5Star tuned....

Bullet Tooth Tony
06-04-2016, 06:55 PM
Yeah it does from the grill, I can make some adjustments to it since this a rough sketch. The grill is the hardest to get an idea for, due to it being the largest area in the front of the truck. But the bumper and lower chin spoiler works so much better.

I'm open to suggestions from anyone who wants to help. The more input I get, the better the chance it will get made. I've already submitted the idea to Cervini's to see if they would take the idea to create a new ground effects kit for the 2010-2014 crew cabs and single cabs.

FX4Life
06-04-2016, 10:28 PM
I just don't like Mustangs. But looks badass, on f150 body. Go for it. Nice sketches btw

Bullet Tooth Tony
06-05-2016, 10:04 PM
If Cervini's does approve the concept drawings and decides to develop a complete kit, I will loose my mind with excitement.

FX4Life
06-05-2016, 10:33 PM
Maybe you'll get the first ones free

Bullet Tooth Tony
06-05-2016, 10:56 PM
If not, them just developing the kit would be awesome enough. I would dedicate the kit to the forum, and let you guys get a crack at them first. There are somethings on my truck I would like to get done first before I dawn the kit.

anaheim_drew
06-07-2016, 05:29 AM
Not many street trucks on this site.

----------



Most of the body mods I'm wanting to do are all one off custom peices and I know a local custom fab shop who said that they would be interested in doing the work.
The shop gave me a rough guestiminte of 15k to 20k for all of the fab work and etc. .
What else were they going to do for 15-20K?

Bullet Tooth Tony
06-07-2016, 05:38 AM
Well, I wanted a full aluminum flush mount bed cover, custom color leather seats (not the factory pleather seat skins) full touch screen/navigation system (which is should have gotten when I bought my truck) and have the truck repainted to a different color or have it fully wrapped

anaheim_drew
06-07-2016, 10:07 AM
How much of that was for the paint job? Was it custom? What was the cost for the one off body parts?

Bullet Tooth Tony
06-07-2016, 03:30 PM
The paint job is going to be custom with graphics. which that is going to be 6 coats of color and 6 coats of clear and pin stripping for $7500. The metal fab was both fenders, custom hood, reworking of the front bumper to match what sketched up in my drawing, aluminum snug fit bed cover and rear dove tail spoiler, and fiber glass side skirts little over $11,000 and both of those prices are with labor.

----------

The good news is I got a response from cervini's today. So hopefully if they do like the sketches, then I wouldn't have to take out another loan to do the work.

http://uploads.tapatalk-cdn.com/20160607/3aa3223772bb7bb9fa494af113cfb180.jpg

Jersey_Joe
06-07-2016, 03:58 PM
The paint job is going to be custom with graphics. which that is going to be 6 coats of color and 6 coats of clear and pin stripping for $7500. The metal fab was both fenders, custom hood, reworking of the front bumper to match what sketched up in my drawing, aluminum snug fit bed cover and rear dove tail spoiler, and fiber glass side skirts little over $11,000 and both of those prices are with labor. ---------- The good news is I got a response from cervini's today. So hopefully if they do like the sketches, then I wouldn't have to take out another loan to do the work.
That is awesome!!! Keep us posted!!

lit up by F150leds.com & 5Star tuned....