PDA

View Full Version : Failed emissions.



Golden
08-14-2013, 01:50 PM
Hi. I have a 96f150, dual tanks, 4x4, I-6. Ok so I just failed emissions. And they gave me these 4 reasons. Im lost and if anyone can help i would love it. Reason 1. P0411 "SECONDARY AIR INJECTION SYSTEM INCORRECT FLOW DETECTED. Reason 2. P0401 EXHAUST GAS RECIRCULATION FLOW INSUFFICIENT DETECTED. Reason 3. P0171 SYSTEM TOO LEAN (BANK 1)(2). Reason 4. P0174 SYSTEM TOO LEAN (BANK 2).

Raptor05121
08-14-2013, 04:20 PM
1 & 2 have to do with the EGR valve and the last two are vacuum leaks, very common

RhinoZ24
08-14-2013, 09:08 PM
1 & 2 have to do with the EGR valve and the last two are vacuum leaks, very common

Meaning you're probably going to have to replace your EGR (Exhaust gas recirculation) valve, and either the PCV or a vacuum line. Try and find the leak first though.

Jersey_Joe
08-15-2013, 01:11 AM
I through a too lean code a few weeks ago and it turned out to b my gas cap. 3$ and a gas cap later..... Cleared code. And it is fine now. But egr and vacuum leaks r common as the professor stated and resident funny man

Golden
08-19-2013, 01:20 PM
I through a too lean code a few weeks ago and it turned out to b my gas cap. 3$ and a gas cap later..... Cleared code. And it is fine now. But egr and vacuum leaks r common as the professor stated and resident funny man

Ok. Thank you. I did fix a few of the issues , but when I just ran it through again the check engine light didn't come on when started. I did nothing at all that would have caused that. So they won't pass it now because that light won't come on. Any idea why it would suddenly stop working?

RhinoZ24
08-19-2013, 02:44 PM
Ok. Thank you. I did fix a few of the issues , but when I just ran it through again the check engine light didn't come on when started. I did nothing at all that would have caused that. So they won't pass it now because that light won't come on. Any idea why it would suddenly stop working?

The check engine light isn't on while it's running? Then you have no issues lol jk. Scan it again and make sure all the previous codes are cleared. That way it'll reset and be able to detect if there is still an issue that needs to be fixed. What ones did you fix so far?

lee reece
08-19-2013, 03:45 PM
Burned out bulb? Just a guess...

Sent from my iPhone using F150 App

----------

Does it not come on when you turn key on?

Sent from my iPhone using F150 App

Golden
08-19-2013, 04:09 PM
Burned out bulb? Just a guess...

Sent from my iPhone using F150 App

----------

Does it not come on when you turn key on?

Sent from my iPhone using F150 App

No it doesn't come on when I turn the key on. It worked on my first test w/emissions which was only two days prior. All I did as far as repairs between tests was I fixed some vac leaks and got a new gas cap. I did nothing at all to any electrical things. I have a hard time believing the idiot light blew in between the retest. Could the first guy who tested it accidentally done something to the datalink or ecu? I'm pretty lost on this one.

joshpickworth
08-19-2013, 07:12 PM
Sounds like a burnt bulb, I had an escort that failed over a burnt bulb

lee reece
08-20-2013, 03:06 PM
It should come on when you first turn the key on to start for 2-3 sec and go out. This is a systems check every time the key is on. The bulb is burnt or fuse blown.

Sent from my iPhone using F150 App

----------


It should come on when you first turn the key on to start for 2-3 sec and go out. This is a systems check every time the key is on. The bulb is burnt or fuse blown.

Sent from my iPhone using F150 App

Some power failure of some kind .

Sent from my iPhone using F150 App