I think they just slide off but want to make sure before I try to broke to fix anything that I brake
I think they just slide off but want to make sure before I try to broke to fix anything that I brake
The fuel lines? What year is your truck, it looks a little different than the '05 setup (different generation truck obviously lol) because mine has fuel rails that go to the fuel injectors, not lines.
Last edited by RhinoZ24; 09-16-2014 at 12:09 AM.
Yeah thats my fuel rail I am redoing my injectors oh its a 99 4.6l 4x4
----------
Those lines go into the back of my fuel rail
In ours, its got a double feed that goes to a fuel pressure regulator. Although I've never seen a connector like that, there is normally a special clip for fuel lines
4.2L V6 - M5OD | SCT XCal 3 @ JawsRacing | K&N Series-77 | 16" Dual Efans | Magnaflow High-Flows
50W 5000K FX-R Projectors | Philips LumiLED Taillights | 60" Plasmaglow Fire & Ice | 2" Drop Shackles
The hose isn't going to come off the fuel rail, I'm pretty sure it is crimped on. The injectors should come loose when you remove the bolts holding the fuel rail down by pulling up on the rail. Pay attention to your O rings, when reinstalling use a little Vaseline on the injector O rings to ease installation.
From infinity and beyond
^^^ yup
Sent from my iPhone using Tapatalk
I am getting ready to go do them right now I'll take a better pic thank you for the in put guys I'll follow the line back and see if they disconnect somewhere I'll let you guys know how it goes
Well at least I got the right side injectors done I am doing the left tomorrow during cuz of my back I can only work for 10mins to 20mins at a time then I have to stop for a little bit anyways here is what they looked like when I pulled them one was pretty dirty
ForumRunner_20140916_204135.jpg
ForumRunner_20140916_204232.jpg
ForumRunner_20140916_204348.jpg