Results 1 to 8 of 8
  1. #1
    Da Professuh Raptor05121's Avatar
    Join Date
    Jan 2012
    Name
    Alex
    Location
    Live Oak, FL
    Posts
    1,444

    Alternator crapped out

    Well it finally happened. After 15 years and 4 months, logging over 321K miles on the stock one, my factory 95A alternator died and my truck left me stranded on I-10. I hitched a ride to work, got my mom to drive me to my truck where I swapped batteries and used her fully charged one to drive home. I got home, pulled the post and sure as crap she dies. So with the few hundred I have saved for my upcoming vacation, I'm about to go drop $140 to upgrade to a 130A alternator. I would rebuild it, but I have work in the morning and need my truck running ASAP.
    4.2L V6 - M5OD | SCT XCal 3 @ JawsRacing | K&N Series-77 | 16" Dual Efans | Magnaflow High-Flows
    50W 5000K FX-R Projectors | Philips LumiLED Taillights | 60" Plasmaglow Fire & Ice | 2" Drop Shackles

  2. #2
    Chief Moderator Jersey_Joe's Avatar
    Join Date
    Jul 2012
    Name
    Joey
    Location
    New Jersey
    Posts
    19,016
    321? Wow. That's a Ford comercial right there bro.

  3. #3
    Super Moderator kozal01's Avatar
    Join Date
    Dec 2011
    Name
    Patrick
    Location
    West Michigan
    Posts
    822
    Wow thats a hell of a good run on that Alt. Stuff always breaks at the wrong time doesnt it? lol
    2005 F-150 Supercrew Lariat 4x4
    Salvage recovery
    Edge Programmer

    2001 Ranger 4x4
    Salvage recovery
    A few mods

  4. #4
    Da Professuh Raptor05121's Avatar
    Join Date
    Jan 2012
    Name
    Alex
    Location
    Live Oak, FL
    Posts
    1,444
    Well I went to VatoZone and the girl behind the counter told me I had a 95A (no ****) and the 130A wont fit, and needs a different belt. I told her otherwise but she wouldn't believe me. She said $122 for the 130A and they wouldn't be responsible for when it doesn't fit. So I left and went to O'Reillys. They had a 130A for $110 + tax. He pulled it out and the case is obviously bigger, but the pulley and mounting brackets were obviously the same. Got home and it took me all of 6 minutes to reinstall it. The dead battery has been on the charger, so I slap that in, and then a quick test drive to the local gas station to reset the fuel tables. I didn't want to spend the cash, but for it lasting as long as it did, I'm okay with it.

    Next up: ball joints
    4.2L V6 - M5OD | SCT XCal 3 @ JawsRacing | K&N Series-77 | 16" Dual Efans | Magnaflow High-Flows
    50W 5000K FX-R Projectors | Philips LumiLED Taillights | 60" Plasmaglow Fire & Ice | 2" Drop Shackles

  5. #5
    Chief Moderator Jersey_Joe's Avatar
    Join Date
    Jul 2012
    Name
    Joey
    Location
    New Jersey
    Posts
    19,016
    That's awesome. That's a good run. Lol

  6. #6
    Senior Member 5.0Flareside's Avatar
    Join Date
    Mar 2013
    Name
    Chris
    Location
    Smyrna, tn
    Posts
    362
    That was a good run on that alternator..

    But a quick tip. The days of pulling a post off the battery while running are over.. That can kill ECU's.. Have had it happen before.. That trick works on older stuff newer stuff is to risky.. ESP when ya can just put a multimeter on it or take it to get tested..


    Sent from my iPhone 4 using Ford Power
    Chris C.
    92 Flareside Built 5.0, built AOD, 3.55 gears
    AMSOIL DEALER
    Private Message for Details

  7. #7
    Da Professuh Raptor05121's Avatar
    Join Date
    Jan 2012
    Name
    Alex
    Location
    Live Oak, FL
    Posts
    1,444
    Quote Originally Posted by 5.0Flareside View Post
    That was a good run on that alternator..

    But a quick tip. The days of pulling a post off the battery while running are over.. That can kill ECU's.. Have had it happen before.. That trick works on older stuff newer stuff is to risky.. ESP when ya can just put a multimeter on it or take it to get tested..


    Sent from my iPhone 4 using Ford Power
    Yes, that is true for 11ths gens and newer, the 10th gen is the last model you can safely "pull the post"
    4.2L V6 - M5OD | SCT XCal 3 @ JawsRacing | K&N Series-77 | 16" Dual Efans | Magnaflow High-Flows
    50W 5000K FX-R Projectors | Philips LumiLED Taillights | 60" Plasmaglow Fire & Ice | 2" Drop Shackles

  8. #8
    Senior Member 5.0Flareside's Avatar
    Join Date
    Mar 2013
    Name
    Chris
    Location
    Smyrna, tn
    Posts
    362
    Even my 9th gen it isn't safe on.. I know I've done it on a previous truck.


    Sent from my iPhone 4 using Ford Power
    Chris C.
    92 Flareside Built 5.0, built AOD, 3.55 gears
    AMSOIL DEALER
    Private Message for Details

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •